Determination the velocity & discharge using floats

APPARATUS:

1) Tape

Measure

2) Stop-Watch

cell phone having a timer

3) Meter stick TO Measure Depth (Tape Measures

are not possible to use)

4) Buoyant

objects such as orange

THEORY:

If a Flow Meter is not Available or Rough

Estimate is enough so we can use the float to calculate the flow. The float can

be any light object such as pine cone or an orange or partially filled plastic

water bottle.

The basic idea is to Measure the time that it

takes a floating object to travel a specified distance downstream. We measure

the flow of stream. Flow is important because define the shape, size and

direction of the stream.

Measure the distance up to 50 feet along the

bank string the rope at the both ends.

1. Using

the total stream calculate the cross sectional area of the stream at the both

end. To find the total stream width and the average depth.

Total Width (feet)*

Average depth (feet) = area in feet.

2. Throw

The Float From Upstream Direction. Get a stop watch to record the time it takes

to reach the downstream. If the float moves too fast so record the data 75 or

100 instead of 50 feet. Repeat this process two more times for a total of three

measurements.

3. Now

in this step we will calculate the velocity the distance covered by float

divided by the average amount of time it took to cover the distance. If the distance is 50 feet and the time taken

by orange 100 seconds so get the velocity is 0.5 feet/sec.

50 feet/100sec=0.5sec.

4. Calculate

the mid-depth velocity by multiplying the surface velocity by 0.85.

0.5×0.85=0.43ft/sec.

5. Now calculate the discharge in

cubic feet per second (cfs) & multiplying the

Velocity (ft/sec) by the cross-sectional area (ft.) of the stream.

0.43ft/secx10.73ft=4.62cfs.

USING A STAFF GUAGE

The staff gage is a long ruler placed half-permanently

in a stream or lake used to measure the water depth. Staff gauges are the most

common & useful for measurement. place the staff gauges in a lake. Place

the three staff gauges because in mid portion the lake water velocity is

different as compared to the side of lake. There is some resistance at the side

of lake that’s why we place the multiple staff gauge. If a staff gauges place

on non-vertical place so knowing that the staff gauges reading is correct or

not.

WHY USE A

STAFF GUAGE

We can use a staff gauge to get the information

in an indirect way to calculate the stream flow. If we place the staff gauge

near a section of stream for which you are collecting flow data, you can

identify the relationship between stream depth & stream flow. Once you got

this relationship so we can calculate flow from the stream depth without having

to take a time to make a detailed flow measurement. A staff gauge having

numerically labeled divided in lines to take the measurement of water &

calculate easily the depth & stream flow.